Our Indirect models, like the rest of the range, are designed to be fed directly from the mains water supply via the inlet group supplied, which is capable of receiving incoming water at pressures up to a maximum of 12 bar. In order to achieve the best performance from our unvented cylinders, the mains water supply must be capable of supplying a flow rate of at least 20 litres per minute with a dynamic pressure of at least 1.5 bar. Should the supply performance be less than this the hot water flow rates will be reduced, however a Warmflow unvented cylinder may still be installed and the benefits of a fast heat-up time and minimal heat losses can still be enjoyed.
| Model | IN120UV | IN150UV | IN180UV | IN210UV | IN250UV | IN300UV |
|---|---|---|---|---|---|---|
| Model | IN120UV | IN150UV | IN180UV | IN210UV | IN250UV | IN300UV |
| Dimensions | ||||||
| (A) Height (mm) | 952 | 1142 | 1327 | 1517 | 1767 | 2077 |
| (B) Secondary return connection (mm) | - | - | - | 1223 | 1473 | 1783 |
| (C) Primary coil upper connection (mm) | 462 | 462 | 532 | 532 | 532 | 532 |
| (D) Cold inlet connection (mm) | 412 | 412 | 482 | 482 | 482 | 482 |
| (E) Primary coil lower connection (mm) | 362 | 362 | 432 | 432 | 432 | 432 |
| Operating Data | ||||||
| Cold water capacity (litres) | 120 | 150 | 180 | 210 | 250 | 300 |
| Weight when full (kg) | 140 | 180 | 210 | 250 | 290 | 350 |
| Standing heat loss (kWh/24h) | 1.15 | 1.31 | 1.4 | 1.66 | 1.92 | 2.07 |
| Performance | ||||||
| Primary coil rating @ 15L/min (kW) | 17.5 | 17.2 | 21.3 | 19.9 | 22.4 | 20.4 |
| Heat up time (EN12897) (mins) | 19 | 25 | 25 | 31 | 34 | 41 |
| ErP Water Rating |  |
 |
|
|
 |
|
Our brochures are in .pdf format and available to read digitally, if you would like a printed copy please don't hesitate to get in touch with our customer service team.